This app supplies, for the current weather conditions and a given engine configuration (engine mannequin, carburetor, floats, track form, and so forth.), a jetting suggestion for go-karts with IAME Screamer, X30 Shifter and 175 cc Super Shifter engines (ICC / KZ1 / KZ2 karting engines) to get the best efficiency.

In order to get the weather values, the applying can use the GPS to acquire the place and altitude, and the network connection to get the temperature, strain and humidity from the closest climate station. Nevertheless, the appliance can run without GPS and web connection, in this case, the person has to enter the climate data.

The software is made up of four tabs that are described next:

- Results: in this tab, a recommended jetting setup is proven. These information are calculated depending on the weather conditions and the engine and monitor configuration given within the other tabs. The following carb values are given: main jet, emulsion tube, needle type and clip position, inner pilot jet (iddle diffuser) and outer pilot jet (iddle jet). In addition, this tab lets do a fine tuning adjustment for the primary (high) and needle (mid) circuits to adapt to your concrete motor and carburetor.

- Weather: you can set the values for present temperature, strain, altitude and humidity. The values of this display can be manually set or may be loaded by the appliance studying the info from the closest public weather station (from the GPS tab).

- Engine: you must set in this display screen the details about your engine, carburator (Dellorto VHSH 30 / VHSB 36 RD) and monitor, that is, the engine model (IAME Screamer, X30 Shifter and a hundred seventy five cc Super Shifter), the float sort and height, the oil mix ratio and the sort of the circuit (sprint or highway racing, brief or long). Depending of the track sort, the jetting setups shall be tailored.

- GPS: this tab allows to use the GPS to get the present place and altitude, and connect with an exterior service to get the weather situations of the nearest climate station (temperature, strain and humidity).

The software works with totally different measure models: inHg, mb, mmHg, hPa, atm for stress, ºC and ºF for temperature.

If you click on in More from developer you can find the other karting instruments from ISEnet:

- Kart Chassis Setup, that helps you set up your chassis easily, for all brands: CRG, Tony Kart, Maranello, Birel, Intrepid, Energy, and so forth.

- Other carburation apps for go karts:

Rotax Max EVO and non-EVO.

IAME X30 Leopard

TM KZ / ICC / Shifter (K9, K9B, K9C, KZ10, KZ10B).

Honda CR125 powered shifter go-kart.

Modena KK1 KK1R

Yamaha KT100.

- Air Density Meter: if you don't find a specific jotting app in your engine, you ought to use this app to create jeting charts.

- Apps for MX bikes (KTM, Honda CR CRF, Yamaha YZ, Suzuki RM, Kawasaki KX).

The app is legitimate for CIK (KZ, KZ2) or other championships.

We're working in new carburetion apps for other kart motors (LKE, Maxter, TKM, Vortex, WTP, and so on.) and a brand new tech apps for Alfano / Mychron visualization. Please send us and email if you wish to be notified when these instruments are printed.

PERMISSIONS:

The software wants the following permissions:

- Your location: it lets the application get the position and the altitude using the GPS to know which is the nearest weather station.

- Storage: it is used for storing the config preferences.

- Network communication: it's used for invoke the external service which provides the current climate conditions

- Phone calls (read telephone state and identity): it permits to get the system identifier in order to validate the license standing of the installed application.